Epoxy Structural Adhesives

Delta D350 50ml Fast Black Polyurethane Twin Cartridge Adhesive is a two part, very fast setting, room temperature curing, polyurethane adhesive system. The 1:1 mix ratio has excellent primeless adhesion to a large variety of surfaces.

Delta D310 50ml Fast Cure Epoxy Twin Cartridge has a curing time of around 5 minutes. Use to bond glass, ceramics, metals, hard plastics and optical fibres. Easily dispensed with application gun D312 and mixing nozzle D313. Ideal for assembly work

Delta D320 50ml Quick Steel Epoxy Twin Cartridge has a fast curing time of around 10 to 15 minutes. Mix at a 1:1 Ratio. Cured colour is a steel grey finish. This steel epoxy substitute will bond and repair steel castings, broken flanges, valves, key ways, and cast iron components. Easily dispensed with application gun D312 and mixing nozzle D313.

Delta MMA400 400ml Twin Cartridge is a two part methacrylate adhesive with a fast curing time of 10 minutes. Use for structural bonding of metals, mild steel, aluminium ferrite, fibreglass, marble, wood, glass, stainless steel, composites, and ceramics, Easily dispensed with the Application Gun SP215 and Mixing Nozzle TP1003

Delta D308 125g Wood Repair Putty is a hand kneadable two part putty that is non shrinking. Ideal for wood repair as becomes a integral part of the wooden item. Application Break off required amount, knead together until uniform colour, apply to prepared surface. Can be smoothed down with water and spatula for a smooth finish.

This Delta Adhesives D305 Aqua repair epoxy putty is a two part adhesive that will cure, bond and repair under water. Use on fibreglass, metals,ceramics, wood, concrete,pipes, valves, even boat hulls etc. A curing time of approx 45 minutes to a colour of white.How to Use: Break off your required amount, knead together until a even colour and apply to the prepared surface. For a smooth finish,  use water and a spatula.

Delta D307 125g Copper Repair Putty is used to repair pipes, tanks, and vessels made of brass, copper, bronze and other non ferrous metals. Ideal for elbows, sink taps and water heaters. Will also seal freeze breaks in pipework. Two part putty formula. Application Break off required amount and knead together until a uniform colour, apply to the prepared surface. Smooth down with water and spatula or damp cloth for a smooth finish.

Delta D309 500gms Aluminium Epoxy Paste is a two part paste with a 2-1 mix ratio. Curing time is approx. 4 to 5 hours and cures to a aluminium colour finish. Will bond and repair aluminium castings, aluminium tanks, pipework etcApplication Use 2 parts base to 1 part activator, mix together until uniform colour and apply to prepared surface. Can be smoothed down with water and a spatula for a smooth finish

Delta D314 25ml Twin Syringe is a toughened adhesive for use on most plastics, PVC, ABS, Acrylics, polyesters, vinyl esters and urethane. Plastic Welder has a good resistance to outdoor weathering. A reasonably fast curing time of 5 - 10 minutes. The bonded materials can be handled within 30 minutes. Ensure that when mixing a uniform colour is reached before applying to the prepared surface. Not suitable for Polyethylene or Polypropelene

Delta D301 is a 25ml 2 Part Metallic Epoxy Adhesive with a cure time of around 10-15 minutes. When fully cured the colour becomes a steel grey finish. Used as a steel epoxy substitute. Will repair steel castings, broken flanges, valves, key ways, and cast iron components.Application Cut the end off the dispensing nozzles and squeeze out the required amount, mix together until a uniform colour and apply to the prepared surface. Smooth down with damp cloth for a super smooth finish.