Anaerobic Adhesives Threadlocking

Delta D66HV 50ml High Viscosity Anaerobic Threadlocking Adhesive is used where disassembly is unlikely. D66HV locks studs, bolts, nuts, screws, and pipe assemblies permanently. Ideal for use with worn threads.

Delta D77 10ml Anaerobic Threadlocking Adhesive is used where disassembly is required. D77 will lock nuts, bolts, screws and studs and will prevent fasteners from working themselves loose through vibration and shock..

Delta D77 50ml Anaerobic Threadlocking Adhesive is used where disassembly is required. D77 will lock nuts, bolts, screws and studs and will prevent fasteners from working themselves loose through vibration and shock..

Delta D33 50ml Anaerobic Thread Locking Adhesive is a capillary action grade used to assemble parts such as threaded fasteners, close fitting parts, instrument assembly. Seals porous castings. Can be disassembled.

Delta D44 50ml Anaerobic Threadlock is a low strength adhesive used for the locking of fasteners, can be re adjusted. Use on electronic assemblies, precision screws and instruments.

Delta D77SC 50ml Anaerobic Threadlocking Adhesive is the slow cure version of D77 and is used where disassembly is required. D77SC will lock nuts, bolts, screws and studs and will prevent fasteners from working themselves loose through vibration and shock..

Delta D66 10ml Anaerobic Threadlocking Adhesive is used where disassembly is unlikely. D66 locks studs, bolts, nuts, screws, and pipe assemblies permanently. Ideal for use with worn threads.

Delta D66 50ml Anaerobic Threadlocking Adhesive is used where disassembly is unlikely. D66 locks studs, bolts, nuts, screws, and pipe assemblies permanently. Ideal for use with worn threads.

Ideal for low-strength thread locking on adjusting screws, countersunk head screws and set screws. Very good on low strength metals which could break during disassembly. Low strength break away - 6Nm. Display packed.

Medium strength (16Nm break away) oil tolerant design for direct application onto parts where a light oily film exists or where surrounding parts contamination is a problem. Display packed.

High strength (40Nm break away) general purpose adhesive for permanent threaded assemblies. Secures studs up to 13mm, sealing against leakage and corrosion. Chemical resistant while also resisting fuels, lubricants and most industrial liquids and gases. Display packed.

Delta 5 bottles of 10ml Lock and Seal often known as Threadlock or Nutlock  is a medium strength locking and sealing anaerobic adhesive used mainly on threaded fasteners like nuts and bolts that may need to be disassembled. Normal hand tools can be used to dismantle if required. Before use make sure parts are clean and dry. anaerobic adhesives work when the air is excluded from the job in progress hence the reason why the bottle is only part filled. Also available in 50ml. If you require quantities of this product the basket will update when ordering to the correct price