In stock
Description
The pull claw of Lift-a-Dent features 3 pull hooks with slotted holes, allowing each claw to adapt to any dents in metal surfaces. After the crimped wire has been spot-welded to the damaged surface, the built-in lever pulls out the dent gradually.
Features
The pull claw of Lift-a-Dent features 3 pull hooks with slotted holes, allowing each claw to adapt to any dents in metal surfaces. After the crimped wire has been spot-welded to the damaged surface, the built-in lever pulls out the dent gradually.
Specification
The pull lever quickly and easily repairs small dents on metal surfaces.
The slotted holes the hooks position themselves automatically pulling the deepest dent out first.
Weld on wire with spot welder or Tec-Spot welder and place slotted hooks between panel and wire. For Tec-Spot welders, see Part Nos. 91975 & 92314.
Suitable for use with Squiggly Wire, please see Power-TEC Part Nos. 91332, 91333 & 91378.
Can also be used with glue pads, please see Power-TEC Part No. 92356.
The slotted holes the hooks position themselves automatically pulling the deepest dent out first.
Weld on wire with spot welder or Tec-Spot welder and place slotted hooks between panel and wire. For Tec-Spot welders, see Part Nos. 91975 & 92314.
Suitable for use with Squiggly Wire, please see Power-TEC Part Nos. 91332, 91333 & 91378.
Can also be used with glue pads, please see Power-TEC Part No. 92356.
Description
The pull claw of Lift-a-Dent features 3 pull hooks with slotted holes, allowing each claw to adapt to any dents in metal surfaces. After the crimped wire has been spot-welded to the damaged surface, the built-in lever pulls out the dent gradually.
Features
The pull claw of Lift-a-Dent features 3 pull hooks with slotted holes, allowing each claw to adapt to any dents in metal surfaces. After the crimped wire has been spot-welded to the damaged surface, the built-in lever pulls out the dent gradually.
Specification
The pull lever quickly and easily repairs small dents on metal surfaces.
The slotted holes the hooks position themselves automatically pulling the deepest dent out first.
Weld on wire with spot welder or Tec-Spot welder and place slotted hooks between panel and wire. For Tec-Spot welders, see Part Nos. 91975 & 92314.
Suitable for use with Squiggly Wire, please see Power-TEC Part Nos. 91332, 91333 & 91378.
Can also be used with glue pads, please see Power-TEC Part No. 92356.
The slotted holes the hooks position themselves automatically pulling the deepest dent out first.
Weld on wire with spot welder or Tec-Spot welder and place slotted hooks between panel and wire. For Tec-Spot welders, see Part Nos. 91975 & 92314.
Suitable for use with Squiggly Wire, please see Power-TEC Part Nos. 91332, 91333 & 91378.
Can also be used with glue pads, please see Power-TEC Part No. 92356.