Mobile Power Packs

12V portable and versatile jump starter. Fitted with LED battery charge indicators, 12V output socket, USB output socket, LED work light, polarity inversion and 150 PSI air compressor with pressure gauge. 1M (approx) cables with insulated clamps. Supplied with 3 inflation nozzles, 230V mains charger and 12V DC charger.

Power Pack/Booster fitted with compressor, work light and 12V DCsocket and USB sockets. Designed for starting petrol and diesel engines with flat batteries, whilst also supplying 12V DC to power 12V electrical devices from the inbuilt 12V DC output socket. Fitted with a LED worklight for use in dark environments and a built - in compressor. Each power pack is also attached with a battery voltage meter, polarity indicator, USB output, air pressure gauge, air compressor accessories compartment, negative and positive clamps.

12V/24V portable and versatile jump starter. Fitted with LED battery charge indicators, 230V DC to AC inverter, 2 x 230V output sockets, 2 x 12V output sockets, LED work light, USB output socket and polarity inversion warning. 1M (approx) cables with insulated jaws. Supplied with 230V mains charger.

• Composite case with integral battery clip storage and carry handle.• Suitable for starting vehicles with 6-cylinder petrol engines up to 3.5L and 4-cylinder diesel engines up to 3L.• LED Battery condition and charge indicators.• Test cycle button gives true battery indication.• 230V Charger with automatic power cut-off prevents damage to battery whilst mains charging.• Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. • Supplied with mains charger.

• Composite case with integral battery clamp storage and carry handle.• Suitable for starting vehicles with 8-cylinder petrol engines up to 5L and 6-cylinder diesel engines up to 3.5L.• Front panel displays internal battery charge level and includes an integral LED work light.• Reverse polarity and short circuit protection with audible warning.• Mains charger with automatic power cut-off prevents damage to battery whilst charging.• Inbuilt MOSFET circuit protection.• Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug.• Single 5V 2.4A USB output.• Supplied with mains charger.

• Composite case with integral battery clamp storage and carry handle.• Suitable for starting 12V vehicles with 8-cylinder petrol engines up to 6L and 8-cylinder diesel engines up to 4.8L.• Suitable for starting 24V vehicles with 6-cylinder petrol engines up to 3.5L and 6-cylinder diesel engines up to 3L.• Front panel displays internal battery charge level and includes an integral LED work light.• Reverse polarity and short circuit protection with audible warning.• Mains charger with automatic power cut-off prevents damage to battery whilst charging.• Inbuilt MOSFET circuit protection.• Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug.• Supplied with mains charger.

• Composite case with battery clip storage lugs and carry handle.• Suitable for starting vehicles at 12V with 8-cylinder petrol engines up to 8L and 6-cylinder diesel engines up to 6L. 24V with 8-cylinder petrol engines up to 4L and 6-cylinder diesel engines up to 3L.• Easy-to-read, colour-coded analogue gauge measures battery condition and charge indicator.• Audible warning system for polarity protection.• Positive cable fitted with protection against reverse charging from the vehicle.• Test cycle button gives true battery indication.• 230V Charger with automatic power cut-off prevents damage to battery whilst charging from the mains.• Fitted with a power socket that will accept any 12V device with a vehicle accessory socket plug.• Supplied with mains charger.

• Composite case with integral battery clip storage and carry handle.• Suitable for starting vehicles at 12V with 8-cylinder petrol engines up to 6L and 8-cylinder diesel engines up to 4.8L. 24V with 6-cylinder petrol engines up to 3.5L and 6-cylinder diesel engines up to 3L.• Two batteries, connected in either parallel or series to suit the output voltage, give high peak and cranking currents.• Fitted with low voltage switch for use when on 24V system recharge, connecting unit to battery producing less than 1V.• LED Battery condition indicators.• Test button gives indication of battery condition.• Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug.• Supplied with mains charger.

• Composite case with integral battery clip storage and carry handle.• Suitable for starting vehicles with 8-cylinder petrol engines up to 5L and 6-cylinder diesel engines up to 3.5L.• Two batteries connected in parallel give high peak and cranking currents.• LED Battery condition indicators.• Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug.• Supplied with mains charger.

• Innovative technology with no internal battery so no need to wait hours for the unit to charge before use.• Simple and safe to use with no long term battery storage issues.• Can be fully energised in approximately 2 minutes.• If the vehicle battery is faulty or is holding less than 5 volts the E/START800 can be pre-charged via another vehicle's battery, the supplied Micro USB charging cable or the 12V accessory lead.• Compact and lightweight for easy handling and storage, yet still delivers the same result as heavy, bulky, lead acid battery equivalents.• Ideal for the professional mechanic and DIY users.

• Innovative technology, which unlike traditional boosters does not require an internal battery as a primary power source but incorporates a lithium battery pack to energise unit when vehicle battery is not sufficient to energise capacitors.• Simple and safe to use with no long term battery storage issues.• Can be fully energised in approximately 2 minutes.• Digital display indicates battery voltage, capacitor charge and faults.• If the vehicle battery is faulty or is holding less than 5 volts the E/START800HY can be pre-charged via an internal lithium battery pack, another vehicle's battery, a Micro USB charging cable (not supplied) or 12V accessory lead.• Compact and lightweight for easy handling and storage, yet still delivers the same result as heavy, bulky, lead acid battery equivalents.• Ideal for the professional mechanic and DIY users.

• Composite case with moulded rubber protection, integral battery cable storage and carry handle.• LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicators. • Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED work light for use at night.• Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug.• Also features a USB outlet (5V/1A).